Snubber-Kondensatoren

Impulsfeste Folien-Kondensatoren mit geringer Induktivität

Um die hohen Anforderungen, welche an aktuelle Netzteile bzw. Stromversorgungen gestellt werden, an Wirkungsgrad und Flexibilität zu erfüllen, werden diese fast immer digital aufgebaut. D.h. es werden Schaltelemente (FETs, IGBTs) sehr schnell an- und ausgeschaltet und über das Verhältnis von An- und Aus-Zeit die Ausgangsspannung reguliert. In 99% dieser Fälle sind Induktivitäten beteiligt. Diese reagieren auf eine schnelle Stromänderung durch einen sprunghaften Anstieg der Spannung, welche ein Vielfaches der eigentlich anliegenden Spannung betragen kann. Um eine Zerstörung der Halbleiter (FET, IGBT) zu vermeiden, muss diese Spannungsspitze bekämpft werden. Dies geschieht mit Hilfe von Snubber-Netzwerken bei denen die, in den Spannungsspitzen enthaltene Energie, buchstäblich verheizt wird. Um dies bewerkstelligen zu können, müssen die Kondensatoren Ströme mit hohen Frequenzen ableiten können. Folien-Kondensatoren für Snubber Anwendungen halten sehr hohe Spannungen aus, haben dabei aber sehr niedrige ESR- und ESL-Werte und sind selbstheilend.

Snubber Kondensatoren Serien

Series Features Applications Case type Terminal type Rated voltage range Operating temperature range
C38 ● Widely used in high voltage, high frequency circuit
● Low loss and small inherent temperature rise
● Excellent active and passive flame resistant circuit
● Especially designed as snubber capacitor for IGBT Box Lug terminals 630 Vdc to 3000 Vdc -40°C ~ 85°C
C3H ● Widely used in high voltage, high frequency circuit
● Low loss and small inherent temperature rise
● Excellent active and passive flame resistant circuit
● Especially designed as snubber capacitor for IGBT Box Radial 630 Vdc to 3000 Vdc -40°C ~ 85°C
C16 ● Metallized polypropylene film, Axial-type
● Excellent self-healing property,
● Low loss and small inherent temperature rise
● Wrapped with polyester adhesive tape and ends filled with flame retardant epoxy resin(UL94 V-0)
● Widely used in high voltage, high frequency circuit
● Snubber capacitor for IGBT   Axial 630 Vdc to 3000 Vdc -40°C ~ 105°C
C3G ● Low loss and small inherent temperature rise
● Low ESR,Low ESL,can withstanding high r.m.s current
● Self-healing property
● Filled with resin.or oil
● High ripple current D.C. filtering
● For hige pulse and high frequency application
Aluminum case,             Inflaming plastic case Bolt type,  Thread hole type, AMP250 1400 Vdc to 4000 Vdc -40°C ~ 85°C
C3T ● Ceramic lead-through
● Self-healing property
● Filled with oil
● Anti-explosion design, more safety
● Especially suitable for snubber circuits
● For high pulse and high frequency application
Aluminum case Bold type 1400 Vdc to 3500 Vac  -40°C ~ 85°C
C3K ● Low loss and small inherent temperature rise
● Low ESR,Low ESL,can withstanding high r.m.s current
● Self-healing property
● Inflaming plastic case, Filled with resin.
● Damping of voltage spikes on GTO-Thyristors
● High ripple current D.C. filtering
● For hige pulse and high frequency application
Inflaming plastic case Axial: Bolt type and Thread hole type 700 Vdc to 9000 Vdc -40°C ~ 85°C

Folien-Kondensatoren Hersteller

Snubber Kondensatoren

Folien-Kondensatoren für Snubber Anwendungen zeichnen sich durch folgende Eigenschaften aus:

  • Sehr niedriger ESR
  • Sehr niedriger ESL
  • Daraus resultierend, sehr niedrige interne Verluste -> wenig Eigenerwärmung
  • Halten hohe Ripple-Ströme aus
  • Sind selbstheilend